NSN 3020-00-356-1319 · NIIN 003561319 · FSC 3020
NO DASHES 3020003561319
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | OAM TYPE HUB W/TWO LOBES LOCATED 0.3437 IN.AND 1.5937 IN.FROM 1ST HUB END |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL IRON CAST |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6595 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 0.6875 |
| CWXP | THIRD STEP NOMINAL LENGTH | FIRST END INCHES 0.0625 |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 15.7165 |
| CWPZ | HELIX ANGLE | DEGREES 30.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 2.4687 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.3437 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.6875 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.750 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.630 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.3755 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.750 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.008 |
| AJLA | TEETH QUANTITY | 36 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.7875 |
| STYL | STYLE DESIGNATOR | |
| CWXT | THIRD STEP NOMINAL DIAMETER | FIRST END INCHES 2.000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.406 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005109868. An older drawing citing one of those numbers resolves here.