NSN 3020-00-358-7204 · NIIN 003587204 · FSC 3020
NO DASHES 3020003587204
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66,C1113,C1115,C1117 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.938 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.5310 |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPZ | HELIX ANGLE | DEGREES 18.7665 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.0360 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.465 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.624 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.631 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| FEAT | SPECIAL FEATURES | ONE GROOVE 0.312 IN. MIN 0.315 IN. MAX W 1ST END ON BODY OF GEAR,TIMING MARK LOCATED 1.125 IN. FROM CENTER OF BORE 9 DEG 10 MIN CCW FROM CENTERLINE OF GROOVE ON 2ND END,FIGURE X ON FACE OF GEAR TOOTH 135 DEG CW FROM TIMING MARK |
| MATT | MATERIAL | OVERALL STEEL |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 004242992. An older drawing citing one of those numbers resolves here.