NSN 3020-00-363-8155 · NIIN 003638155 · FSC 3020
NO DASHES 3020003638155
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.250 |
| CWNH | TOOTH FORM | STANDARD |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.195 |
| ANTP | BORE STYLE | |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.188 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.345 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.125 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.625 |
| MATT | MATERIAL | OVERALL STEEL COMP 1141 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 55.0 |
| AJLA | TEETH QUANTITY | 40 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 002725859. An older drawing citing one of those numbers resolves here.