NSN 3020-00-385-5521 · NIIN 003855521 · FSC 3020
NO DASHES 3020003855521
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.4000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.063 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.1265 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.5975 |
| CWNH | TOOTH FORM | STANDARD |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 55.0 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.4218 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| MATT | MATERIAL | OVERALL STEEL COMP 1141 |
| AJLA | TEETH QUANTITY | 24 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.625 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.619 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ANTP | BORE STYLE |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002393884 · 003638154. An older drawing citing one of those numbers resolves here.