NSN 3020-00-390-7386 · NIIN 003907386 · FSC 3020
NO DASHES 3020003907386
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.380 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 49.8167 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.260 |
| CBBL | FEATURES PROVIDED | ZEROL TEETH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 60.0 AND ROCKWELL C MAXIMUM 63.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.242 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 15 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.1136 |
| AJLA | TEETH QUANTITY | 45 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.9375 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.800 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.378 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.630 |
| CWTR | HUB STYLE DESIGNATOR | |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6263 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 223389 | 0AHP5 |