NSN 3020-00-390-8070 · NIIN 003908070 · FSC 3020
NO DASHES 3020003908070
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 38.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.500 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.125 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.4000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.062 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.438 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.750 |
| CWNH | TOOTH FORM | STANDARD |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.281 |
| CWTR | HUB STYLE DESIGNATOR | |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE |