NSN 3020-00-400-0496 · NIIN 004000496 · FSC 3020
NO DASHES 3020004000496
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.750 |
| AAQL | BODY STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0000 |
| MATT | MATERIAL | OVERALL STEEL COMP 3120 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.188 |
| FEAT | SPECIAL FEATURES | TWO PULLER HOLES TAPPED 1/4-28 THD SIZE,0.500 IN. DEEP IN,WEBBING,2ND END ON 1.188 IN. DIA BOLT CIRCLE,150 DEG APART AND 90 DEG FROM KEYWAY |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.158 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.458 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 50.0 AND ROCKWELL C MAXIMUM 58.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.166 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.438 |
| AJLA | TEETH QUANTITY | 20 |
| ANTP | BORE STYLE | |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRB | BODY RECESS NOMINAL DEPTH | SECOND END INCHES 0.438 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003638209. An older drawing citing one of those numbers resolves here.