NSN 3020-00-405-5127 · NIIN 004055127 · FSC 3020
NO DASHES 3020004055127
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.380 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.180 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| ANTP | BORE STYLE | |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.127 |
| AAQL | BODY STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.9990 AND INCHES MAXIMUM 1.0000 |
| AJLA | TEETH QUANTITY | 96 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.305 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.020 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.180 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 123AMM12186 | 26512 |
| GG515BH2 | 26512 |
| GG15BH2 | 26512 |
| 96S96-1250-094 | 15531 |