NSN 3020-00-409-1442 · NIIN 004091442 · FSC 3020
NO DASHES 3020004091442
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.070 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.313 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 4,T4 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.8115 AND INCHES MAXIMUM 0.8125 |
| AJLA | TEETH QUANTITY | 65 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| CWPP | PRESSURE ANGLE | DEGREES 45.0000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.010 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 80 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.060 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.080 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.837 |
| CWNH | TOOTH FORM | STUB |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.090 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6019-441 | 09966 |