NSN 3020-00-429-9649 · NIIN 004299649 · FSC 3020
NO DASHES 3020004299649
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.4980 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.3310 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWQD | PITCH ANGLE | DEGREES 45.0000 |
| STYL | STYLE DESIGNATOR | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 29.9 AND ROCKWELL C MAXIMUM 34.3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| AJLA | TEETH QUANTITY | 19 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| ANTP | BORE STYLE | |
| FEAT | SPECIAL FEATURES | TAPERED KEYWAY; KEYWAY WIDTH 0.500 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.0480 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.2500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.9580 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.752 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 008555734. An older drawing citing one of those numbers resolves here.