NSN 3020-00-433-1266 · NIIN 004331266 · FSC 3020
NO DASHES 3020004331266
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.120 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.315 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.103 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.530 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.887 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.690 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.195 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.650 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 34.0 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.7920 |
| AJLA | TEETH QUANTITY | 19 |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 4140 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 212151 | 99193 |