NSN 3020-00-444-1779 · NIIN 004441779 · FSC 3020
NO DASHES 3020004441779
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | SPECIAL |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.360 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.527 |
| MATT | MATERIAL | TEETH PLASTIC POLYAMIDE NYLON |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.007 |
| MATT | MATERIAL | BODY ALUMINUM ALLOY |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.7570 |
| CWRB | BODY RECESS NOMINAL DEPTH | FIRST END INCHES 0.375 |
| AJLA | TEETH QUANTITY | 38 |
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.760 |
| CWSN | KEYWAY NOMINAL WIDTH | SECOND END INCHES 0.250 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | SECOND END INCHES 1.120 |
| CWTB | COUNTERBORE NOMINAL DEPTH | FIRST END INCHES 0.175 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 2.000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.625 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 009830951. An older drawing citing one of those numbers resolves here.