NSN 3020-00-447-2686 · NIIN 004472686 · FSC 3020
NO DASHES 3020004472686
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.3704 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.700 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.344 |
| AJLA | TEETH QUANTITY | 29 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.094 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.562 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AISI TO SAE E4340 |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.875 |
| CWNM | TOOTH DIRECTION | RIGHT |
| AAQL | BODY STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWPZ | HELIX ANGLE | DEGREES 25.8419 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.375 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006925685. An older drawing citing one of those numbers resolves here.