NSN 3020-00-458-4544 · NIIN 004584544 · FSC 3020
NO DASHES 3020004584544
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 20 |
| CWTX | HUB NOMINAL DIAMETER | BETWEEN BODY AND FLANGE INCHES 0.188 |
| AAQL | BODY STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.188 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPS | FLANGE NOMINAL THICKNESS | INCHES 0.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.094 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 56 |
| CWSH | NOMINAL DISTANCE BETWEEN OUTER BODY FACE AND INNER FLANGE FACE | INCHES 0.125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303SE,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.2073 AND INCHES MAXIMUM 0.2083 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| CWTR | HUB STYLE DESIGNATOR | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH FLANGE THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.228 |
| CWNH | TOOTH FORM | STANDARD |
| CWNK | FLANGE NOMINAL DIAMETER | INCHES 0.250 |
| ANTP | BORE STYLE | |
| STYL | STYLE DESIGNATOR | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH FLANGE UNIFIED NATIONAL COARSE (UNC) |
| MATT | MATERIAL | OVERALL STEEL COMP 303SE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 120220 | 10138 |