NSN 3020-00-467-3100 · NIIN 004673100 · FSC 3020
NO DASHES 3020004673100
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.491 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.000 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 17.9167 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.500 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 50.0 AND ROCKWELL C MAXIMUM 54.0 |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 5.1110 AND INCHES MAXIMUM 5.1120 |
| AJLA | TEETH QUANTITY | 39 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.875 |
| MATT | MATERIAL | OVERALL STEEL |
| CWNM | TOOTH DIRECTION | RIGHT |
| ANTP | BORE STYLE | |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.375 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.933 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.875 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.356 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 004231138. An older drawing citing one of those numbers resolves here.