NSN 3020-00-474-5094 · NIIN 004745094 · FSC 3020
NO DASHES 3020004745094
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303S |
| AAQL | BODY STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.438 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.138 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C NOMINAL 26.0 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| ANTP | BORE STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.4062 |
| AJLA | TEETH QUANTITY | 90 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7746421P1 | 24446 |
| P34100103 | 99872 |
| H22-90P1 | 00328 |
| G13-90ESS90 | 00141 |
| 7746421P1 | 03538 |
Supersedes
This item replaces cancelled NIINs 009137921 · 011059064. An older drawing citing one of those numbers resolves here.