NSN 3020-00-478-3534 · NIIN 004783534 · FSC 3020
NO DASHES 3020004783534
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 22 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.371 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.220 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.105 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.115 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.175 |
| ANTP | BORE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303,COND A |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.2700 AND INCHES MAXIMUM 0.2900 |
| FEAT | SPECIAL FEATURES | ONE HOLE 0.041 IN. DIA DRILLED THROUGH,0.110 IN. FROM CENTER OF HUB |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| AAQL | BODY STYLE | |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| CWTR | HUB STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 24759-1 | 70210 |