NSN 3020-00-484-3520 · NIIN 004843520 · FSC 3020
NO DASHES 3020004843520
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: NSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER)
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.8000 |
| AJLA | TEETH QUANTITY | 24 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 4.000 |
| FEAT | SPECIAL FEATURES | 1 HOLE 0.504 IN. DIA DRILLED THROUGH ON TOOTH TO BORE ON CENTERLINE OF GEAR FACE; TM 9-2320-360-24P FIG 179 |
| ABSA | SPLINE QUANTITY | 62 |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER) |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.031 |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.438 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.629 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.120 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.5830 |