NSN 3020-00-495-4434 · NIIN 004954434 · FSC 3020
NO DASHES 3020004954434
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.1552 AND INCHES MAXIMUM 1.1562 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.689 |
| SFTT | SURFACE TREATMENT | TEETH CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TEETH ASSN STD SINGLE TREATMENT RESPONSE A-S2406 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-869 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.256 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.630 |
| CWTB | COUNTERBORE NOMINAL DEPTH | BOTH ENDS INCHES 0.256 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.216 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.670 |
| ABSA | SPLINE QUANTITY | 12 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.880 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| FEAT | SPECIAL FEATURES | FOUR SLOTS 0.120 IN. WIDE AND 0.030 IN. DEEP EQUALLY SPACED ON FACE OF SECOND END HUB |
| MATT | MATERIAL | OVERALL STEEL |
| AJLA | TEETH QUANTITY | 37 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.6000 |
| AAQL | BODY STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 96750 | 11599 |