NSN 3020-00-495-7097 · NIIN 004957097 · FSC 3020
NO DASHES 3020004957097
In Stock
GEAR,INTERNAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | SPECIAL |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.3850 |
| AAQL | BODY STYLE | |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 1.6180 |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CBBL | FEATURES PROVIDED | SPUR TEETH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.4155 |
| CWTR | HUB STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.6666 |
| AJLA | TEETH QUANTITY | 10 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.4750 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.0630 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.1870 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.4030 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.7500 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.0680 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.4370 |
| ABSA | SPLINE QUANTITY | 10 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.0090 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.