NSN 3020-00-507-2403 · NIIN 005072403 · FSC 3020
NO DASHES 3020005072403
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 14 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0250 |
| CWPP | PRESSURE ANGLE | DEGREES 30.0000 |
| CWPZ | HELIX ANGLE | DEGREES 9.0000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.375 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.874 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.190 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.530 |
| FEAT | SPECIAL FEATURES | TWO PULLER HOLES 1/4-28 UNF 2B THD LOCATED ON A 1-9/32 IN. DIA BOLT CIRCLE 3/8 IN. DEEP |
| MATT | MATERIAL | OVERALL STEEL COMP 4142H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 4142H |
| STYL | STYLE DESIGNATOR | |
| CWNM | TOOTH DIRECTION | RIGHT |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.295 |
| CWNH | TOOTH FORM | STANDARD |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 64777 | 15434 |
Supersedes
This item replaces cancelled NIIN 005865208. An older drawing citing one of those numbers resolves here.