NSN 3020-00-517-0627 · NIIN 005170627 · FSC 3020
NO DASHES 3020005170627
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.950 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.313 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.750 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.563 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.491 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.750 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.8425 |
| AJLA | TEETH QUANTITY | 15 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 27.1 AND ROCKWELL C MAXIMUM 32.2 |
| STYL | STYLE DESIGNATOR | |
| CWPZ | HELIX ANGLE | DEGREES 8.5000 |
| MATT | MATERIAL | OVERALL STEEL |
| AAQL | BODY STYLE | |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,SAE 3135 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 15097A | 1ML14 |
| G509-0194803 | 19207 |
| 15097A | 28265 |
| 2421RX | 45152 |
| DT31318F | 56442 |
| AUC2UU0855 | 62265 |
| 2421RX | 75Q65 |
| FMT1A7382 | 95201 |