NSN 3020-00-517-0856 · NIIN 005170856 · FSC 3020
NO DASHES 3020005170856
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.037 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.437 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0000 |
| AAQL | BODY STYLE | |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 6,TYE C |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| AJLA | TEETH QUANTITY | 48 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.187 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007605878. An older drawing citing one of those numbers resolves here.