NSN 3020-00-517-0933 · NIIN 005170933 · FSC 3020
NO DASHES 3020005170933
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQD | PITCH ANGLE | DEGREES 14.5000 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 30.0 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.156 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7500 |
| AJLA | TEETH QUANTITY | 24 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.500 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.138 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.793 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.500 |
| CWPP | PRESSURE ANGLE | DEGREES 45.0000 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007605166. An older drawing citing one of those numbers resolves here.