NSN 3020-00-517-2170 · NIIN 005172170 · FSC 3020
NO DASHES 3020005172170
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.250 |
| AAQL | BODY STYLE | |
| STYL | STYLE DESIGNATOR | |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.187 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.460 |
| CWTR | HUB STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 2.3330 AND INCHES MAXIMUM 2.3335 |
| AJLA | TEETH QUANTITY | 28 |
| MATT | MATERIAL | OVERALL STEEL COMP 3135 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.375 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.625 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.125 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.500 |
| CWNH | TOOTH FORM | STANDARD |
| ANTP | BORE STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.625 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.750 |