NSN 3020-00-517-2649 · NIIN 005172649 · FSC 3020
NO DASHES 3020005172649
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.161 |
| AJLA | TEETH QUANTITY | 20 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0000 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.158 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.453 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.750 |
| FEAT | SPECIAL FEATURES | 2 TAPPED PULLER HOLES 0.250-28 UNF,1-188 C TO C |
| MATT | MATERIAL | OVERALL STEEL COMP 1213 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.1875 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.751 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.375 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.5188 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.0625 |
| CWRB | BODY RECESS NOMINAL DEPTH | SECOND END INCHES 0.4375 |