NSN 3020-00-517-2655 · NIIN 005172655 · FSC 3020
NO DASHES 3020005172655
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.231 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.500 |
| CWNH | TOOTH FORM | STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 5,T4 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.4573 AND INCHES MAXIMUM 1.4583 |
| AJLA | TEETH QUANTITY | 70 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.138 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 5 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2017 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.175 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.438 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |