NSN 3020-00-517-2866 · NIIN 005172866 · FSC 3020
NO DASHES 3020005172866
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.500 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 15.0000 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 8.5833 |
| CWNM | TOOTH DIRECTION | LEFT |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 8.3333 |
| AJLA | TEETH QUANTITY | 50 |
| MATT | MATERIAL | OVERALL STEEL COMP 4615 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 4615 |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.875 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.875 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 2.000 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.500 |