NSN 3020-00-517-3222 · NIIN 005173222 · FSC 3020
NO DASHES 3020005173222
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.1120 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.6460 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE NAVAL,-IL-B-994 |
| STYL | STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.0310 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.3750 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6040 |
| AJLA | TEETH QUANTITY | 123 |
| ANTP | BORE STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPZ | HELIX ANGLE | DEGREES 3.5498 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.2500 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.5000 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.1869 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWNH | TOOTH FORM | STANDARD |