NSN 3020-00-517-3919 · NIIN 005173919 · FSC 3020
NO DASHES 3020005173919
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| AAQL | BODY STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.7244 |
| CWTR | HUB STYLE DESIGNATOR | |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.9244 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.250 |
| AJLA | TEETH QUANTITY | 60 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.375 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.000 |
| FEAT | SPECIAL FEATURES | TWO 3/8 IN.-16 HOLES 60 DEG AND 120 DEG ON EA SIDE OF KEYWAY ON SECOND END,3/32 IN. HOLE 180 DEG FROM KEYWAY THROUGH HUB TO BORE,TIMING MARK 152 DEG 8 MIN FROM CENTERLINE OF KEYWAY,THREE 3/32 IN. HOLES EQUALLY SPACED THROUGH TEETH |
| CWNM | TOOTH DIRECTION | RIGHT |