NSN 3020-00-517-3937 · NIIN 005173937 · FSC 3020
NO DASHES 3020005173937
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.275 |
| AAQL | BODY STYLE | |
| FEAT | SPECIAL FEATURES | TWO HOLES 0.109 IN. DIA AND 0.094 IN. DEEP DRILLED INTO BODY OF GEAR OPPOSITE HUB. HOLES ARE 180 BEG APART AND ON THE SAME CENTER LINE AS BORE. THE CENTER OF DRILLED HOLES ARE 0.187 IN. FROM CENTER OF BORE |
| MATT | MATERIAL | OVERALL COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-636 |
| STYL | STYLE DESIGNATOR | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.040 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.2182 AND INCHES MAXIMUM 1.2187 |
| AJLA | TEETH QUANTITY | 78 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.250 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.390 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.225 |