NSN 3020-00-517-7334 · NIIN 005177334 · FSC 3020
NO DASHES 3020005177334
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.445 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.688 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.702 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.125 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY FIRST END THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.383 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.4112 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| STYL | STYLE DESIGNATOR | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | AXIALLY THROUGH BODY FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.155 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.2000 |
| AJLA | TEETH QUANTITY | 42 |
| ANTP | BORE STYLE | |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | AXIALLY THROUGH BODY FIRST END INCHES 0.375 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 17600 | 95201 |
Supersedes
This item replaces cancelled NIIN 002002163. An older drawing citing one of those numbers resolves here.