NSN 3020-00-517-7342 · NIIN 005177342 · FSC 3020
NO DASHES 3020005177342
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CQFM | HARDNESS RATING | BODY ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 35.0 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.201 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRB | BODY RECESS NOMINAL DEPTH | SECOND END INCHES 0.441 |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.1000 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 50.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.365 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.2000 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.625 |
| MATT | MATERIAL | OVERALL STEEL COMP 4150 |
| ABSA | SPLINE QUANTITY | 11 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003528392. An older drawing citing one of those numbers resolves here.