NSN 3020-00-528-1228 · NIIN 005281228 · FSC 3020
NO DASHES 3020005281228
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.582 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.5400 AND INCHES MAXIMUM 1.5420 |
| AJLA | TEETH QUANTITY | 74 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.125 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.5937 |
| FEAT | SPECIAL FEATURES | 2 0.138 IN. DIA THREADED HOLES ON HUB 90.0 DEG APART FOR POSITIONING |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.094 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.4377 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.687 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 004319349. An older drawing citing one of those numbers resolves here.