NSN 3020-00-531-0848 · NIIN 005310848 · FSC 3020
NO DASHES 3020005310848
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.688 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.501 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 4 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.160 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.188 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.9940 AND INCHES MAXIMUM 1.0000 |
| AJLA | TEETH QUANTITY | 12 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 42.0 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.750 |
| FEAT | SPECIAL FEATURES | BORE OF GEAR SECOND END COUNTERSUNK BY 45 DEG TO 0.094 INCH DEPTH |
| CWTR | HUB STYLE DESIGNATOR | |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.158 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE MANGANESE AND PHOSPHATE ZINC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL--16232,TYE Z,CLASS 1 AND MIL SPEC SINGLE TREATMENT RESPONSE -IL--16232,TYE -,CLASS 1 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A31228 | 53397 |
| 1005005310848 | A00AM |
| 5310848 | 19204 |
| 5310848 | 19205 |
| 5310848 | 19200 |