NSN 3020-00-541-0089 · NIIN 005410089 · FSC 3020
NO DASHES 3020005410089
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.500 |
| STYL | STYLE DESIGNATOR | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.406 |
| CWNH | TOOTH FORM | STANDARD |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.4677 AND INCHES MAXIMUM 0.4687 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303S |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AJLA | TEETH QUANTITY | 30 |
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.219 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP32-30 | 23266 |
| 328C101H06 | 79500 |
| 450518-17 | 80249 |
| 450518-17REVH | 80249 |
| 328C101H06 | 97942 |
| G15-30 | 00141 |
Supersedes
This item replaces cancelled NIINs 009736318 · 010216433 · 010304107. An older drawing citing one of those numbers resolves here.