NSN 3020-00-542-0287 · NIIN 005420287 · FSC 3020
NO DASHES 3020005420287
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.4286 |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4145 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.9531 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.5000 |
| FEAT | SPECIAL FEATURES | TWO HOLES 1/2-20 NF LOCATED 180 DEG APART ON CENTERLINE OF KEYWAY ON 3-3/4 IN.O/A BOLT CIRCLE |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.5000 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.4990 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.0630 |
| CWRB | BODY RECESS NOMINAL DEPTH | SECOND END INCHES 0.6250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.875 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.6508 |
| CWNH | TOOTH FORM | STUB |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 27.0 AND ROCKWELL C MAXIMUM 32.0 |
| ANTP | BORE STYLE | |
| AJLA | TEETH QUANTITY | 45 |