NSN 3020-00-542-4071 · NIIN 005424071 · FSC 3020
NO DASHES 3020005424071
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 32.0 |
| ANTP | BORE STYLE | |
| BDZQ | BACKLASH DESIGNATION | GRADE B |
| AJLA | TEETH QUANTITY | 264 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.5000 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 4.1900 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 9 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 3.6255 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.1255 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.8755 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.1255 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.5395 |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 72116 | 24930 |