NSN 3020-00-552-4911 · NIIN 005524911 · FSC 3020
NO DASHES 3020005524911
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | BOTH ENDS INCHES 0.5020 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.8750 |
| AJLA | TEETH QUANTITY | 126 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.2000 |
| CWXB | FIRST STEP NOMINAL DIAMETER | BOTH ENDS INCHES 1.775 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.2500 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 24 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.7510 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.625 |
| CWWN | END NOMINAL DIAMETER | BOTH ENDS INCHES 1.575 |
| CWWS | FIRST STEP NOMINAL LENGTH | BOTH ENDS INCHES 0.249 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.9985 |
| CWNH | TOOTH FORM | STANDARD |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 009622644. An older drawing citing one of those numbers resolves here.