NSN 3020-00-554-7022 · NIIN 005547022 · FSC 3020
NO DASHES 3020005547022
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.0600 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.1230 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0650 |
| AAQL | BODY STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.628 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.6693 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.1255 |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | TWO PULLER HOLES 0.323 IN. DIA ON A 2.060 IN. DIA BOLT CIRCLE,2ND @END COUNTERSUNK 1.400 IN. DIA 45 DEG 0.140 IN. DEEP |
| MATT | MATERIAL | OVERALL STEEL |
| AJLA | TEETH QUANTITY | 112 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.7690 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.3750 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.3800 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 24.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.4350 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.3988 |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 887271 | 06141 |
Supersedes
This item replaces cancelled NIIN 005872459. An older drawing citing one of those numbers resolves here.