NSN 3020-00-554-9029 · NIIN 005549029 · FSC 3020
NO DASHES 3020005549029
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.155 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.8337 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.5370 |
| AJLA | TEETH QUANTITY | 24 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.4985 |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 18.7665 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.7305 |
| CWNH | TOOTH FORM | STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI C1113 |
| AAQL | BODY STYLE | |
| FEAT | SPECIAL FEATURES | TIMING MARK LOCATED 45 DEG CW FROM CENTER LINE OF KEYWAY,DRILL POINT ON CENTER LINE OF A TOOTH,0.062 IN. BY 45 DEG CHAMFER OF BORE 1ST END |
| MATT | MATERIAL | OVERALL STEEL |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7768015 | 19207 |
| GA36A | 53496 |
| GA36A1 | 66289 |
| 360D1-0558 | 75377 |
Supersedes
This item replaces cancelled NIINs 001464040 · 002731604 · 007768015. An older drawing citing one of those numbers resolves here.