NSN 3020-00-568-1286 · NIIN 005681286 · FSC 3020
NO DASHES 3020005681286
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | TEETH ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 85.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.025 |
| CWTR | HUB STYLE DESIGNATOR | |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| BDYK | SERRATION PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.375 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| ADDW | SERRATION QUANTITY | 16 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.8750 |
| AJLA | TEETH QUANTITY | 25 |
| CQFM | HARDNESS RATING | BODY ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.800 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | FIRST END INCHES 0.057 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| CWNH | TOOTH FORM | SPECIAL |