NSN 3020-00-580-9534 · NIIN 005809534 · FSC 3020
NO DASHES 3020005809534
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.380 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.164 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.370 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 AND THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.062 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0000 |
| AJLA | TEETH QUANTITY | 32 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL B NOMINAL 94.0 |
| AAQL | BODY STYLE | |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.113 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.620 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | HUB ROCKWELL B NOMINAL 94.0 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.750 |
| ANTP | BORE STYLE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7416303P1 | 24454 |
| B7416303P1 | 24454 |
| B7416303P1 | 24446 |
| 7416303P1 | 24446 |
Supersedes
This item replaces cancelled NIIN 003275546. An older drawing citing one of those numbers resolves here.