NSN 3020-00-580-9539 · NIIN 005809539 · FSC 3020
NO DASHES 3020005809539
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.156 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.205 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.124 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWNH | TOOTH FORM | STANDARD |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.792 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.280 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.7500 |
| AJLA | TEETH QUANTITY | 84 |
| ANTP | BORE STYLE | |
| FEAT | SPECIAL FEATURES | ONE0.0760 IN. DIA BY 0.12 IN. DEEP PIN HOLE ON PLAIN SIDE ON 0.250 IN. RADIUS FROM BORE CENTER |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7426007P1 | 24454 |
| B7426007P1 | 24454 |
| B7426007P1 | 24446 |
| 7426007P1 | 24446 |
| 7426007P1 | 03538 |
Supersedes
This item replaces cancelled NIIN 006072382. An older drawing citing one of those numbers resolves here.