NSN 3020-00-585-4661 · NIIN 005854661 · FSC 3020
NO DASHES 3020005854661
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.158 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.360 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.600 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.396 |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.3750 |
| AJLA | TEETH QUANTITY | 36 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| SFTT | SURFACE TREATMENT | OVERALL CHROMATE |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.221 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.300 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.240 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| B7426402P1 | 24446 |
| B7426916P1 | 24446 |
| 7426916P1 | 24446 |
| B7426402P1 | 24454 |
| 7426916P1 | 03538 |
Supersedes
This item replaces cancelled NIIN 006072387. An older drawing citing one of those numbers resolves here.