NSN 3020-00-585-9048 · NIIN 005859048 · FSC 3020
NO DASHES 3020005859048
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.000 |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.750 |
| CWTR | HUB STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.2243 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.251 |
| CWPC | THREAD FORM QUANTITY | 3 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 6.4500 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 3.000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.250 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.500 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3303550 PIECE 5 | 80064 |
| 101C479AK1 | 03502 |
| 125D589AE | 03502 |
| 101C479-AK1 | 17454 |
Supersedes
This item replaces cancelled NIIN 011813398. An older drawing citing one of those numbers resolves here.