NSN 3020-00-614-6480 · NIIN 006146480 · FSC 3020
NO DASHES 3020006146480
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 217.0 AND BRINELL STANDARD MAXIMUM 255.0 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.000 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.000 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.875 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.251 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 15.3249 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.500 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.191 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.623 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.311 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.4804 |
| AJLA | TEETH QUANTITY | 50 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.727 |
| MATT | MATERIAL | OVERALL IRON CAST |
| STYL | STYLE DESIGNATOR | |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.746 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 40-3076101-C | 1ML14 |
| 40-3076101 | 1ML14 |
| 256070C | 28265 |
| 40-3076101 | 28265 |
| 40-3076101-C | 28265 |
| 256070 | 28265 |
Supersedes
This item replaces cancelled NIINs 002483518 · 010410211. An older drawing citing one of those numbers resolves here.