NSN 3020-00-619-8380 · NIIN 006198380 · FSC 3020
NO DASHES 3020006198380
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSA | SPLINE QUANTITY | 6 |
| AAQL | BODY STYLE | |
| FEAT | SPECIAL FEATURES | COUNTERBORE 2ND END 1.000 IN.NOMDIA BY 1.750 IN. NOM DEPTH |
| MATT | MATERIAL | OVERALL COPPER ALLOY 675 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.078 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 2.500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.994 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.9980 AND INCHES MAXIMUM 2.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-728,CLASS A,CO- HARD TO D TO |
| AJLA | TEETH QUANTITY | 48 |
| ANTP | BORE STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.375 |
| CWNH | TOOTH FORM | STANDARD |