NSN 3020-00-623-9620 · NIIN 006239620 · FSC 3020
NO DASHES 3020006239620
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| ANTP | BORE STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.0000 |
| AJLA | TEETH QUANTITY | 128 |
| CWNH | TOOTH FORM | STANDARD |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.250 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.250 |
| AAQL | BODY STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.258 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.905 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.136 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.542 |
| STYL | STYLE DESIGNATOR | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 36.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.113 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.209 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.062 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 367192 | 98889 |