NSN 3020-00-630-0549 · NIIN 006300549 · FSC 3020
NO DASHES 3020006300549
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 27 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 0.5900 |
| FEAT | SPECIAL FEATURES | 4TH STEP 0.708 IN. DIA BY 0.0045 IN. LG;2ND END COUNTERBORED 0.439 IN. DIA BY 0.650 IN. DP |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.2000 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.3500 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.447 |
| CWNH | TOOTH FORM | SPECIAL |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| MATT | MATERIAL | OVERALL STEEL |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.1775 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.6500 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.063 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.6875 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.543 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.284 |
| CWSF | NOMINAL RADIUS | BOTH ENDS INCHES 0.219 |
| CWXT | THIRD STEP NOMINAL DIAMETER | FIRST END INCHES 0.688 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6265 |
| CWXP | THIRD STEP NOMINAL LENGTH | FIRST END INCHES 0.100 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 714009 | 99167 |